Sclcr1616k09-Sh Miniturn Holder Iso Item #Sclcr1616k09-Sh Ingersoll Part #6224445 Csp - Coolant: No. Kapr - Cutting Edge Angle: 95. Lf - Functional Length: 125 Mm. Hf - Functional Height: 16.00 Mm. Hand - Hand: Right. H - Shank Height: 16.00 Mm. B - Shank Width: 16.00 Mm. Wf - Functional Width: 12.00 Mm. Csp - Coolant: No. Kapr - Cutting Edge Angle: 95. Lf - Functional Length: 125 Mm. Hf - Functional Height: 16.00 Mm. Hand - Hand: Right. Dxf File: . Step Light File: . Step Detailed File: . H - Shank Height: 16.00 Mm. B - Shank Width: 16.00 Mm. Wf - Functional Width: 12.00 Mm. Miid - Master Insert Identification: Ccmt09t302fa.

• Screw-held holder for external machining
• Accepts positive 7 Degree clearance 80 Degree rhombic inserts
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held
• 10-16 mm Shank
• Positive 7deg clearance 80deg rhombic
• Ground inserts for small parts
• Positive 7deg clearance 80deg rhombic
• Ground inserts with wiper geometry for small parts
• Positive 7deg clearance 80deg rhombic PCD tipped inserts
• Positive 7deg clearance 80deg rhombic
• Inserts for aluminum
• Ground and very sharp
• Positive 7deg clearance 80deg rhombic ground insert
• For high precision turning applications
• Positive 7deg clearance 80deg rhombic ground insert
• For deep depth of cut on Swiss type lathes
• Positive 7deg clearance 80deg rhombic ground insert
• For low depth of cut on Swiss type lathes
• Positive 7deg clearance 80deg rhombic ground insert
• For medium depth of cut on Swiss type lathes
• Positive 7deg clearance 80deg rhombic CBN tipped inserts
• Positive 7deg Clearance 80deg Rhombic CBN-Tipped Inserts
• Positive 7deg Clearance 80deg Rhombic CBN-Tipped Inserts with Wiper Geometry
• Positive 7deg clearance 80deg rhombic CBN tipped inserts
• Wiper geometry
• Positive 7deg clearance 80deg rhombic PCD tipped inserts
• Positive 7deg clearance 80deg rhombic inserts
• For super finishing applications
• Positive 7deg clearance 80deg rhombic inserts
• For finishing applications
• Positive 7deg clearance 80deg rhombic inserts
• For semi-finishing to medium applications
• Positive 7deg clearance 80deg rhombic inserts
• For medium to medium-rough applications
• Positive 7deg clearance 80deg rhombic inserts with PC chipbreaker
• Positive 7deg clearance 80deg rhombic inserts
• For finishing or higher feed rate applications
• C-Adapter (ISO 26623-1)
• Quick Change Holder for METRIC External Square Shank Tools
• 100 Bar Max PSI
• C-Adapter (ISO 26623-1)
• Quick Change Holder for METRIC External Square Shank Tools
• 100 Bar Max PSI