Ccgt21.50.5M-Sl-F Tt4430 Turning Insert Carbide Iso Item #Ccgt060202m-Sl-F Tt4430 Ingersoll Part #6309115 Re - Corner Radius: 0.008. Ih - Insert Hand: Neutral. Noi - Number Of Indexes: 2. S - Thickness: 0.094. L - Cutting Edge Length: 0.254. Ic - Inscribed Circle Diameter : 0.250. An - Clearance Angle Major: 7. Epsr - Insert Included Angle: 80. D1 - Fixing Hole Diameter : 0.110. Fn - Cutting Feed Min.: 0.0008. Fn - Cutting Feed Max.: 0.0039. Ap - Cutting Depth Min.: 0.001. Ap - Cutting Depth Max.: 0.010. Dxf File: . Step Light File: . Step Detailed File: . Re - Corner Radius: 0.008. Ih - Insert Hand: Neutral. Noi - Number Of Indexes: 2. S - Thickness: 0.094. L - Cutting Edge Length: 0.254. Ic - Inscribed Circle Dia.: 0.250. An - Clearance Angle Major: 7. Epsr - Insert Included Angle: 80. D1 - Fixing Hole Dia.: 0.110. Fn - Cutting Feed Min.: 0.0008. Fn - Cutting Feed Max.: 0.0039. Ap - Cutting Depth Min.: 0.001. Ap - Cutting Depth Max.: 0.010.

• Positive 7 Degree clearance 80 Degree rhombic ground insert
• For low depth of cut on Swiss type lathes
• Positive 7deg clearance 80deg rhombic ground insert
• For low depth of cut on Swiss type lathes
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Side Hook Lever Clamp
• .375-.625" Shank
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Side Hook Lever Clamp
• 10-12 mm Shank
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held
• T-Modular Connection
• 16-40 mm
• Coolant Thru (except DTC-D16 size)
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held
• .375-1.000" Shank
• Coolant Thru
• Positive 80deg CC_T/CC_W Inserts
• 0deg Lead, Screw Held
• 10-16 mm Shank
• Positive 80deg CC_T/CC_W Inserts
• 0deg Lead, Screw Held, Right Hand
• .375-.500" Shank
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held
• 10-16 mm Shank
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held, Right Hand
• .375-.625" Shank
• Positive 80deg CC_T/CC_W Inserts
• -5deg Lead, Screw Held
• .375-1.500" Shank