Tms-25Hsdunl1305-Tb Miniturn Holder Iso Item #Tms-25Hsdunl1305-Tb Ingersoll Part #6312651 Csp - Coolant: Yes. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 22.00 Mm. Lf - Functional Length: 100.0 Mm. H - Shank Height: 23.00 Mm. Hand - Hand: Left. Wf - Functional Width: 10.00 Mm. Dcon - Shank Diameter : 25.00 Mm. Ldred - Reduced Body Diameter Length: 26.00 Mm. Wf2 - Functional Width 2: 7.00 Mm. Csp - Coolant: Yes. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 22.00 Mm. Lf - Functional Length: 100.0 Mm. H - Shank Height: 23.00 Mm. Hand - Hand: Left. Dxf File: . Step Light File: . Step Detailed File: . Wf - Functional Width: 10.00 Mm. Ldred - Reduced Body Dia. Length: 26.00 Mm. Dcon - Shank Dia.: 25.00 Mm. Wf2 - Functional Width 2: 7.00 Mm. Miid - Master Insert Identification: Dngg130502ml.

• Screw-held round shank holder for external turning
• Accepts negative 55 Degree rhombic inserts
• High pressure coolant
• Negative 55deg DN_G/DN_X-1305 Inserts
• -3deg Lead, Screw Held, Left Hand
• 25 mm Shank
• High Pressure Coolant
• Negative 55deg rhombic ground insert
• For general applications in Swiss type machines
• Negative 55deg rhombic ground insert
• For medium applications
• Negative 55deg rhombic common-type with chipbreaker
• For medium applications
• Negative 55deg rhombic inserts
• For super finishing applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For finishing applications
• Negative 55deg rhombic inserts
• For finishing applications
• Negative 55deg rhombic inserts
• For super finishing applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For medium applications
• Negative 55deg rhombic inserts
• For finishing to medium wiper applications
• Negative 55deg rhombic inserts
• For medium applications
• Reduction Sleeve (Metric)
• For use in holders with exchangeable adaption
• -B indicates non-threaded access hole
• C-type sleeves, inch to metric