Tms-20Hsvubl11 Miniturn Holder Iso Item #Tms-20Hsvubl11 Ingersoll Part #6314779 Csp - Coolant: No. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 21.00 Mm. Lf - Functional Length: 100.0 Mm. H - Shank Height: 18.00 Mm. Hand - Hand: Left. Wf - Functional Width: 10.00 Mm. Dcon - Shank Diameter : 20.00 Mm. Ldred - Reduced Body Diameter Length: 25.00 Mm. Wf2 - Functional Width 2: 8.00 Mm. Csp - Coolant: No. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 21.00 Mm. Lf - Functional Length: 100.0 Mm. H - Shank Height: 18.00 Mm. Hand - Hand: Left. Dxf File: . Step Light File: . Step Detailed File: . Wf - Functional Width: 10.00 Mm. Ldred - Reduced Body Dia. Length: 25.00 Mm. Dcon - Shank Dia.: 20.00 Mm. Wf2 - Functional Width 2: 8.00 Mm. Miid - Master Insert Identification: Vbgt110302sa.

• Screw-held round shank holder for external turning
• Accepts positive 5 Degree clearance 35 Degree rhombic inserts
• Positive 35deg VB_T/VB_W Inserts
• -3deg Lead, Screw Held, Left Hand
• 20-25 mm Round Shank
• Positive 5deg clearance 35deg rhombic ground inserts
• For small part applications
• Positive 5deg clearance 35deg rhombic inserts
• Ground inserts with wiper geometry
• For small part applications
• Positive 5deg Clearance 35deg Rhombic Ground Inserts for Precision Finishing
• Positive 5deg clearance 35deg rhombic ground inserts
• For precision finishing applications
• Positive 5deg clearance 35deg rhombic ground inserts
• For low depth of cut on Swiss type lathes
• Positive 5deg clearance 35deg rhombic ground inserts
• For medium depth of cut on Swiss type lathess
• Positive 5deg clearance 35deg rhombic CBN tipped inserts
• Positive 5deg clearance 35deg rhombic inserts
• For super finishing applications
• Positive 5deg clearance 35deg rhombic inserts
• For semi-finishing to medium applications
• Reduction Sleeve (Metric)
• For use in holders with exchangeable adaption
• -B indicates non-threaded access hole
• C-type sleeves, inch to metric
• C-type sleeves (Metric)