Tms-16Xsducr11-Tb Miniturn Holder Iso Item #Tms-16Xsducr11-Tb Ingersoll Part #6316144 Csp - Coolant: Yes. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 20.00 Mm. Lf - Functional Length: 85.0 Mm. H - Shank Height: 15.00 Mm. Hand - Hand: Right. Wf - Functional Width: 10.00 Mm. Cnt - Coolant Entry Thread Size: 5/16-24 Unf. Dcon - Shank Diameter : 16.00 Mm. Ldred - Reduced Body Diameter Length: 28.00 Mm. Wf2 - Functional Width 2: 6.00 Mm. Csp - Coolant: Yes. Kapr - Cutting Edge Angle: 93.0. Lu - Usable Length: 20.00 Mm. Lf - Functional Length: 85.0 Mm. H - Shank Height: 15.00 Mm. Hand - Hand: Right. Dxf File: . Step Light File: . Step Detailed File: . Wf - Functional Width: 10.00 Mm. Ldred - Reduced Body Dia. Length: 28.00 Mm. Cnt - Coolant Entry Thread Size: 5/16-24 Unf. Dcon - Shank Dia.: 16.00 Mm. Wf2 - Functional Width 2: 6.00 Mm. Miid - Master Insert Identification: Dcmt11t302fa.

• Screw-held round shank holder for external turning
• Accepts positive 7 Degree clearance 55 Degree rhombic inserts
• High pressure coolant
• Positive 55deg DC_T/DC_W Inserts
• -3deg Lead, Screw Held
• 16-25 mm
• High Pressure Coolant
• Positive 7deg Clearance 55deg Rhombic
• Ground inserts for small parts
• Positive 7deg Clearance 55deg Rhombic
• Ground inserts with wiper geometry for small parts
• Positive 7deg Clearance 80deg Rhombic PCD-Tipped Inserts
• Positive 7deg clearance 55deg rhombic
• Inserts for aluminum applications
• Ground and very sharp
• Positive 7deg clearance 55deg rhombic ground insert
• For high precision turning applications
• Positive 7deg clearance 55deg rhombic ground insert
• For deep depth of cut on Swiss type lathes
• Positive 7deg clearance 55deg rhombic ground insert
• For low depth of cut on Swiss type lathes
• Positive 7deg clearance 55deg rhombic ground inserts
• For medium depth of cut on Swiss type lathes
• Positive 7deg clearance 55deg rhombic CBN tipped inserts
• Positive 7deg Clearance 55deg Rhombic CBN-Tipped Inserts
• Positive 7deg clearance 55deg rhombic PCD tipped inserts
• Positive 7deg clearance 55deg rhombic inserts
• For super finishing applications
• Positive 7deg clearance 55deg rhombic inserts
• For finishing applications
• Positive 7deg clearance 55deg rhombic inserts
• For semi-finishing to medium applications
• Positive 7deg clearance 55deg rhombic inserts
• For medium machining applications
• Positive 7deg clearance 55deg rhombic inserts
• For semi-finish and medium machining applications
• Reduction Sleeve (Metric)
• For use in holders with exchangeable adaption
• -B indicates non-threaded access hole
• C-type sleeves, inch to metric