Fd2000100t5r00 Twistsfeed Body Iso Item #Fd2000100t5r00 Ingersoll Part #6320978 Dcon - Shank Diameter : 25.00 Mm. Lu - Usable Length: 104.0 Mm. Lf - Functional Length: 128.0 Mm. Ls - Shank Length: 56.0 Mm. Ssc - Insert Seat Size: 20. Dcx - Cutting Diameter Max.: 0.8228 (20.900 Mm). Dcn - Cutting Diameter Min.: 0.7874 (20.000 Mm). Df - Flange Diameter : 32.0 Mm. Uldr - Usable Length Diameter Ratio: 5Ã?. Dcon - Shank Dia.: 25.00 Mm. Lu - Usable Length: 104.0 Mm. Lf - Functional Length: 128.0 Mm. Ls - Shank Length: 56.0 Mm. Dxf File: . Step Light File: . Step Detailed File: . Ssc - Insert Seat Size: 20. Dcx - Cutting Dia. Max.: 0.8228 (20.900 Mm). Dcn - Cutting Dia. Min.: 0.7874 (20.000 Mm). Uldr - Usable Length Dia. Ratio: 5Ã?.

• 015.0-20.9mm
• Universal Shank (Metric)
• Coolant Through
• Holds +.002/-.000 on Hole Diameter
• 0 12.0-25.9 mm
• Cylindrical Shank (Metric)
• Coolant Through
• Holds +.002/-.000 on Hole Diameter
• 0 .4724-1.0197"(12.0-25.9 mm)
• 3-Flute Self-Centering Geometry
• Steel & Cast Iron Applications
• Grade IN2205
• Holds +.002/-.000 on Diameter
• 0 .4724-1.0197" (12.0 - 25.9 mm)
• 3-Flute Flat Bottom Geometry
• Steel & Cast Iron Applications
• Grade IN2205
• Holds +.002/-.000 on Diameter
• BT MAS-403
• Hydraulic Milling Chuck (Metric)
• High runout accuracy of < 0.003 mm
• For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
• BT30/BT40 balanced G2.5@18,000 RPM
• BT50 balanced G2.5@12,000 RPM
• Chucking forces will be reduced by 25% when using sleeves
• *See Notes below
• DIN69871 V-Flange
• Hydraulic Milling Chuck (Metric)
• High runout accuracy of < 0.003 mm
• For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
• DIN69871-40 balanced G2.5@18,000 RPM
• DIN69871-50 balanced G2.5@12,000 RPM
• Chucking forces will be reduced by 25% when using sleeves
• *See Notes below
• DIN69880 VDI
• Hydraulic Milling Chuck (Metric)
• High runout accuracy of < 0.003 mm
• For use in Reaming, Drilling, Finish Milling, and fine, accurate machining applications
• Chucking forces will be reduced by 25% when using sleeves
• *See Notes below
• HSK-A (DIN 69893/A)
• Hydraulic Milling Chuck (Metric)
• HSKA50, A63 balanced G2.5@25,000RPM
• HSKA80, A100 balanced G2.5@18,000RPM
• Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
• *See additional notes below
• HSK-A (DIN 69893/A)
• Hydraulic Milling Chuck (Metric)
• HSKA50, A63 balanced G2.5@25,000RPM
• HSKA80, A100 balanced G2.5@18,000RPM
• Note: Chucking forces will be reduced by 25% when optional reduction sleeves are used
• *See additional notes below