1" 5 Flute .060" Corner Radius Coolant-Thru Carbide Chip Breaker End Mill, 3" LOC, 1" Plain Shank, 37° Helix, Z-Carb-HPR Series Z5C, Ti-NAMITE-A (AlTiN) Coated, For High Performance Roughing
SGS37717
37717
Z5R10000E060TAC
UPC: 691781377179
Weight: 2.1 LBS
Brand: KYOCERA SGS PRECISION TOOLS
Product Description
Sgs Z-Carb-Hpr - High Performance Roughers. The Sgs Z-Carb Hpr Five Flute Roughing End Mills Are Ideal For Achieving High Material Removal Rates And Superior Finishes. The Specialized Five Flute Design Is Engineered For Strength, Chip Evacuation, And Increased Productivity Over Three And Four-Flute End Mills By 20–40%. The Variable Flute Pattern Provides Excellent Chatter Suppression Over A Range Of Spindle Speeds. The Open-Center Design Delivers Efficiency During Entry Movements Into The Workpiece. The Helix Angle Is Engineered For Balance Between Positive Cutting Action And Reduced Contact Area To Control Tool Pressure And Spindle Load. The Specially Designed Radial Rake Balances Positive Cutting Action And Edge Strength. The End Grind Features Include A Positive Axial Rake For High-Performance Shearing And Lifting Of Material, And Increased Clearances To Eliminate Edge Build-Up During Ramping. Select Sizes Of The Z-Carb-Hpr Are Availalbe With A Central Coolant Hole To Deliver Coolant Effectively To The Cutting Zone And Enhance Chip Removal When Pocketing Or Slotting. Some Tools Are Offered With A Chip Breaker Option. The Chip Breakers Break Up The Chips Formed By Long Flute Engagement, Allowing For Better Chip Flow And Evacuation In Deep Pocketing Operations. This Specialized Chip Breaker Design Enhances Edge Strength And Reduces Load. With The Z-Carb-Hpr, Typical Ramp Angles Of 5 Degrees Are Common; However, Greater Than 5 Degree Ramp Angles Are Obtainable With Reduced Feed Rates. The Open Center Design Provides An Ideal Exit For Central Coolant And Chip Flushing While Maintaining The 5 Degree Ramp Angle. In Roughing Operations, One Times Diameter Slotting Capability Is Common While 50% Radial By 150% Axial Heavy Profiling Capability Is Common. The Variable Geometry Contributes To Exceptional Finishing Capabilities; 10 Μin. Ra Is Possible. The Z-Carb-Hpr Is Availalbe With Three High Performance Coatings: Ti-Namite-M Coating For Higher Heat Resistance To Enhance Tool Life In Difficult To Machine Materials Like Titanium. Ti-Namite-A Coating For Superior Wear, Edge Build-Up Resistance And Extended Tool Life In Difficult To Machine Materials Like Stainless Steel. New Megacoat Nano Layered Coating With Excellent Wear And Oxidation Resistance For Difficult-To-Cut Materials Like Heat-Resistant Super Alloys And Stainless Steel.
- An ideal balance of helix, indexing, flute depth, rake and relief
- Variable indexing for chatter supression and patented edge geometry for shearing and strength
- Chatter-free geometry allows deep cutting and high speed machining
- Central coolant hole delivers coolant effectively to the cutting zone enhancing chip removal when pocketing or slotting
- Enhanced corner geometry with tight tolerance corner radii
- Excels at roughing, ramping, high speed machining and finishing in a variety of materials
Shipping & Delivery Options
CUYAHOGA FALLS, OHIO USA
$50.00 MINIMUM ORDER
SGS-Kyocera will Ship Same Business Day if ordered by 1pm Eastern Standard Time
Additional Product Details
Technical Details
- Manufacturer
- KYOCERA SGS PRECISION TOOLS
- Manufacturer Part Number
- 37717
- Cutter Diameter
- 1.0000" 1"
- Length Of Cut
- 3.0000"
- Overall Length
- 6.0000"
- Shank Diameter
- 1.0000"
- Radius Size
- .060"
- Number Of Flutes
- 5
- Helix Angle
- 37°
- End Style
- Corner Radius
- Tool Coating
- AlTiN (Ti-NAMITE-A)
- Tool Substrate Material
- Carbide
- Primary Application
- High Performance Roughing
- Hand Cutting Direction
- Right Hand Cutting
- Material Food Group
- (P), (M), (K), (S), Also (H)
- Inch Or Metric
- Inch
- Country of Origin
- U.S.A.
- Hand Helix Direction
- Right Hand Helix
- Series
- Z5C
- Single Or Double End
- Single End
- Center Cutting
- No
- Flute End Type
- .3500" Non-Cutting Center Diameter
- Type Of End Mill
- Chip Breaker Rougher/Finisher
- Model
- Z-Carb-HPR
- Shank Type
- Plain Shank
- Neck Diameter
- Does not apply
-
Chip Breaker
- Yes
-
Coolant Through
- Internal Coolant Hole
-
Length
- Extra Long
-
Helix Type
- Regular Helix
Follow
Follow @SuncoastTools
