Shop Threading Taps by Material and Hole Type
Shop threading taps from Suncoast Precision Tools’ Florida stock for pickup in Largo or shipping nationwide. Start with the metal you’re tapping, then choose a tap that carries chips out of a blind hole, pushes them through the part, or forms the thread without chips.
Shop Taps by Work Material
Taps for Stainless Steel
For a blind hole in stainless steel, a right-hand spiral flute tap draws long chips back toward the shank. For a through hole, a spiral point tap pushes them ahead. Check the tap’s material rating against the stainless grade on your drawing.
Taps for Aluminum
Start with the alloy. Wrought aluminum can produce long chips, so chip clearance matters in a blind hole. If you’re tapping a die casting, check that the tap series covers the casting alloy. A form tap is an option when the alloy is ductile enough.
Taps for Steel and Cast Iron
For steel, match the tap to the workpiece hardness. For gray cast iron, which produces short chips, look for a tap series rated for cast iron. For hardened steel, check the maximum workpiece hardness listed for the tap series.
Shop by Tap Style and Hole Type
Spiral Flute Taps for Blind Holes
When the hole stops inside the part, chips need a path back out. A right-hand spiral flute carries them toward the shank. Choose a bottoming or modified-bottoming chamfer when full threads must extend close to the bottom.
Spiral Point Taps for Through Holes
A spiral point tap, also called a gun tap, pushes chips ahead of the cutting edge. Choose it when the tap can pass through the workpiece and the chips have room to exit.
Thread Forming Taps and Roll Taps
A form tap, also called a roll tap, displaces ductile metal to form a thread without cutting chips. Check the alloy, pre-drill and lubricant recommended for the tap series.
Hand Taps and Bottoming Taps
A taper chamfer gives a gradual start when tapping by hand. A plug chamfer suits general work. A bottoming hand tap has a shorter lead for finishing threads near the bottom of a blind hole.
NPT Pipe Taps
Match the pipe tap to the thread called out on the fitting or drawing. NPT and NPTF are tapered pipe threads. NPSM is a straight pipe thread. Check the designation on the individual tap before ordering.
STI Taps for Screw Thread Inserts
An STI tap cuts the receiving thread in the parent material before a screw thread insert is installed. Use the insert system’s tap and pre-drill specifications when preparing a new hole or repairing a damaged thread.
Shop Specialty Threading Taps
Choose a Specialty Tap for the Job
For a recessed hole or a fixture that limits access, compare the reach and shank clearance of extension and DIN-length taps. Choose a left-hand tap for a left-hand thread or an oversize tap when the job calls for extra pitch diameter. For superalloys and titanium, check the tap’s rating for the alloy you’re machining.
Tap Selection Questions
- Which taps can I use across several materials?
- For routine shop work, start with general-purpose taps. If you want to run the same tap in several metals, compare the alloy recommendations for multi-purpose taps, universal multi-purpose taps and Combo taps in Florida stock.
- Do cutting taps and forming taps use the same pre-drill?
- A forming tap generally calls for a larger pre-drilled hole than a cutting tap for the same thread. Use the pre-drill recommendation for the specific tap, work material and thread engagement.
- How do I check which taps are available for pickup in Largo?
- Open the Florida-stock tap listings and select a part. Check its Florida Stock availability against the quantity you need for same-day pickup in Largo.