Follow
Follow @SuncoastTools
Fullerton High-Performance Carbide Drills & Holemaking Tools
Explore Fullerton carbide drilling options for production holemaking, with high-performance AlumaDrill, Poly Drill and Inovatools families leading the selection. Choose a drill around the work material, hole diameter, drilling depth and chip-removal requirements. For holes that require a separate finishing operation, pair the drill with a Fullerton just-in-time carbide reamer.
Inovatools High-Performance Drills
Shop the German-made Inovatools drilling range offered through Fullerton. Compare the listed series for usable drilling depth, point geometry and coolant delivery. The range includes application-focused carbide designs, so use the exact product specifications to match the drill to the material and machine setup.
1565 AlumaDrill
AlumaDrill is a three-flute, high-performance carbide drill for aluminum and other listed materials. Its application range includes brass, copper, titanium and selected non-metallic materials. Choose the cutting diameter and required depth, and review the series recommendations for the particular alloy or material before programming the cut.
Poly Drills for Composites
Explore Poly Drill options for drilling composites, graphite and plastics. These materials call for attention to hole-edge condition, chip removal and workpiece support. Use the product category to compare the available drill geometry and coating, then confirm the series and specifications for your composite or polymer.
Spotting & Center Drills
Choose spotting tools for the hole-starting operation where the drilling process calls for one. Center drills serve center-hole applications and have their own dimensional and angle requirements. Compare the required point or included angle and the drawing, rather than treating every short drill as interchangeable.
Finish the Hole with JIT Reamers
Plan the final hole size and surface requirement early. Fullerton JIT carbide reamers can be specified for the required cutting diameter, with stub and standard lengths and several flute styles. Establish the pre-ream hole size and allowance from the material and tool guidance before choosing the companion drill.
General-Purpose Carbide Drills
Compare 1500 notched cam-point, 1510 four-facet point and 1540 thinned-point drills for their listed drilling applications. These families provide supporting options alongside the high-performance range. Confirm diameter, flute length, overall length and material suitability for the required hole.
Match Hole Depth & Coolant Delivery
Compare the usable drilling depth with the complete hole requirement, including breakthrough or tip allowance where applicable. Check whether the selected drill requires internal coolant and whether the machine can supply it. Use the recommended drilling cycle for that exact series and application.
Choose the Geometry for the Material
Material condition changes drill selection. Aluminum, composites and hardened workpieces place different demands on the edge and chip space. Compare AlumaDrill and Poly Drill for their listed materials, and use the 1570 die-drill category for the specific applications covered by that series.
Connect Holemaking with High-Performance Milling
For parts that combine pockets, profiles and precision holes, compare the drilling plan with the milling and reaming sequence. Use AlumaMill for suitable aluminum work, TiMill for titanium applications, and JIT reamers where the drawing calls for a finished bore. Review each tool independently for the operation it will perform.
Fullerton Carbide Drill Bits: Selection Questions
- Which high-performance drilling families are featured here?
- The page leads with Inovatools drills offered through Fullerton, 1565 AlumaDrill and Poly Drill options. Use the named category links to compare the available series, dimensions and applications.
- What is AlumaDrill used for?
- AlumaDrill is a three-flute carbide drill with listed uses in aluminum, brass, copper, titanium and selected non-metallic materials. Check the Fullerton guidance for your exact material and drilling conditions.
- Which drill options should I compare for composites?
- Start with the Poly Drill category. Confirm the series, material recommendation and coating, and plan the workpiece support and drilling method for the required hole-edge quality.
- Is flute length the same as usable drilling depth?
- Not necessarily. Confirm the usable depth specified for the selected tool and allow for its point geometry, chip space and any clearance needed at the hole exit. Overall length and flute length alone do not define the drilling cycle.
- When should I add a reaming operation?
- Consider reaming when the drawing requires a finished diameter or surface condition that the drilling process alone will not reliably achieve. Establish the prepared hole and allowance before selecting the reamer.
- Are Inovatools drills made in the USA?
- The Inovatools drill category on Suncoast is identified as German-made. It is offered alongside Fullerton tooling; verify the product origin for the exact item instead of applying one country-of-origin statement to the whole page.